1) FSQ 150 Trailed Fertiliser Spreader

• Live drive.
• Flow control.
• No drive disengagement.
• Ideal for fertilising small parks, large golfing greens.
• Salt and sand attachment available for salting driveways, yards or paths.
• Can be closed off to spread alternate sides.

2) FSQ 500 Trailed Fertiliser Spreader

• Live drive.
• Flow control.
• Drive disengagement.
• Perfect for fertilising large area golf courses, larger area parks, farming paddocks etc.
• Can be used to salt drives and yards.
• Can be closed off to spread either side.

ALSO AVAILABLE AS SALT SPREADER
WITH PLASTIC HOPPER.

3) FS300 Tractor Mounted Spinner

• All spinners have internal bracing in the hopper, can be used for spreading salt and sand.
• An even spread of over 45ft.
  (depending on material).
• 3 Point Linkage Spinner
• Complete with Power Take Off Shaft.

4) FS500 Tractor Mounted Spinner.

• All spinners have internal bracing in the hopper, can be used for spreading salt and sand.
• An even spread of over 45ft
  (depending on material)
• 3 Point Linkage Spinner
• Complete with Power Take Off Shaft.

SALT AND SAND VERSION ALSO AVAILABLE.

5) FS 400 Wag Tail Fertiliser Spreader

• Transmission group with stroke regulator.
  Regulates the spraying angle of the spreading tube from 38 degrees to 58 degrees, allowing adjustment to the spreading range from 4metres to 24metres.
• LONG AGITATOR for powdery and wet fertilisers.
• OSCILLATING TUBE with interchangeable end parts:
   
   A) LOCALISED BROADCAST VERSION.
   B) UNIFORM BROADCAST VERSION.
• REGULATION LEVER:
   
  A selector with 15 opening allows maximum precision in pre-selected dosages.
   
• DOSAGE SYSTEM:
   
  Designed to reach precise regulation of the product even in small quantities.
   
• TRANSMISSION GROUP:
   
  Composed of a continuous stroke regulator that allows variation of the tube firing stroke from a minimum of 38 degrees to a maximum of 58 degrees. In this way it is possible o vary the spreading amplitude from approximately 6 meters to a maximum of approximately 24 metres.
• EQUIPPED WITH TWO OSCILLATING AGITATORS:
   
  (SHORT) For granular fertiliser and seeds.
  (LONG) For organic and pulverised fertilisers.

6) FS 550 Wag Tail Fertiliser Spreader

• Transmission group with stroke regulator.
• Regulates the spraying angle of the spreading tube from 38 degrees to 58 degrees, allowing adjustment to the spreading range from 4metres to 24metres.
• LONG AGITATOR for powdery and wet fertilisers.
• OSCILLATING TUBE with interchangeable end parts:
  
  A) LOCALISED BROADCAST VERSION.
  B) UNIFORM BROADCAST VERSION.
• REGULATION LEVER:
   
  A selector with 15 opening allows maximum precision in pre-selected dosages.
• DOSAGE SYSTEM:
   
  Designed to reach precise regulation of the product even in small quantities.
• TRANSMISSION GROUP:
   
  Composed of a continuous stroke regulator that allows variation of the tube firing stroke from a minimum of 38 degrees to a maximum of 58 degrees. In this way it is possible o vary the spreading amplitude from approximately 6 meters to a maximum of approximately 24 metres.
• EQUIPPED WITH TWO OSCILLATING AGITATORS:
   
  (SHORT) For granular fertiliser and seeds.
  (LONG) For organic and pulverised fertilisers.

7) FS 700 Wag Tail Fertiliser Spreader

• Transmission group with stroke regulator.
• Regulates the spraying angle of the spreading tube from 38 degrees to 58 degrees, allowing adjustment to the spreading range from 4metres to 24metres.
• LONG AGITATOR for powdery and wet fertilisers.
• OSCILLATING TUBE with interchangeable end parts:
   
  A) LOCALISED BROADCAST VERSION.
  B) UNIFORM BROADCAST VERSION.
• REGULATION LEVER:
   
  A selector with 15 opening allows maximum precision in pre-selected dosages.
• DOSAGE SYSTEM:
   
  Designed to reach precise regulation of the product even in small quantities.
• TRANSMISSION GROUP:
   
  Composed of a continuous stroke regulator that allows variation of the tube firing stroke from a minimum of 38 degrees to a maximum of 58 degrees. In this way it is possible o vary the spreading amplitude from approximately 6 meters to a maximum of approximately 24 metres.
• EQUIPPED WITH TWO OSCILLATING AGITATORS:
   
  (SHORT) For granular fertiliser and seeds.
  (LONG) For organic and pulverised fertilisers.

8) FS 900 Wag Tail Fertiliser Spreader

• Transmission group with stroke regulator.
• Regulates the spraying angle of the spreading tube from 38 degrees to 58 degrees, allowing adjustment to the spreading range from 4metres to 24metres.
• LONG AGITATOR for powdery and wet fertilisers.
• OSCILLATING TUBE with interchangeable end parts:
   
  A) LOCALISED BROADCAST VERSION.
  B) UNIFORM BROADCAST VERSION.
• REGULATION LEVER:
   
  A selector with 15 opening allows maximum precision in pre-selected dosages.
• DOSAGE SYSTEM:
   
  Designed to reach precise regulation of the product even in small quantities.
• TRANSMISSION GROUP:
   
  Composed of a continuous stroke regulator that allows variation of the tube firing stroke from a minimum of 38 degrees to a maximum of 58 degrees. In this way it is possible o vary the spreading amplitude from approximately 6 meters to a maximum of approximately 24 metres.
• EQUIPPED WITH TWO OSCILLATING AGITATORS:
   
  (SHORT) For granular fertiliser and seeds.
  (LONG) For organic and pulverised fertilisers.

9) Hydraulic Big Bag Lifter

• 6 - 1200Kg Capacity.
• 4 Meter maximum height.
• Close coupling to tractor and spreader.
• Robust box section construction for handling big bag fertiliser.

9.1) Wag Tail Pendulum Fertiliser Spreader.

• Strong Robust Frame
• Spreading Width 6 - 12 Metres
• Low Positioned Hopper for Easy Filling
• All Grease Points Easy Access
• Category 1 & 2 Linkage Points
• Hydraulic Opening Optional
• All spreaders have Heavy Duty Gearboxes.
• Non steel hoppers which are more resistant to corrosive fertilisers.
• Designed for more precise spreading.

9.2) Wag Tail Pendulum Fertiliser Spreaders

MODELS:

• PD600 (12 Bag)
  PD800 (16 Bag)
  PD 1000 (20 Bag)
  PD 1500 (30 Bag)
• All spreaders have HD Gearboxes.
• Non steel hoppers which are more resistant to corrosive fertilisers.
• Designed for more precise spreading.
• Heavier Frame
• All Grease Points Easy Access
• Low Positioned Hopper for Easy Filling
• Compatible With All VICON Parts
• Quick Hitch Attachment as Standard
• Optional Hydraulic Opening

9.3) FS500 Fertiliser Spreader

• Low set bin for easy filling.
• The frame can be dissembled completely to reduce package bulk for container loading.
• Spreading disc rotation engaging and releasing lever.
• Possibility of using narrower or wider wheels to tow the spreader on golf courses or tilled fields, or on the road.
• 6 galvanised blade disc and transmission with hardened gears in oil bath.

PRODUCT SPECIFICATIONS:

• Hopper Capacity P180 - 300 - 400 - 500
• Spreading Widths 6m - 12m.
• Working Speeds 6 - 11km/ph
• Maximum Spreading 2 Hectares
• Min H.P. Required 15HP